Dmp Compact Module 1I Nc Analog (6Fc5211-0Aa10-0Aa0) - Siemens SINUMERIK 810DE powerline Equipment Manual

8 DMP Compact Modules

8.5 DMP compact module 1I NC analog (6FC5211-0AA10-0AA0)

8.5 DMP compact module 1I NC analog
(6FC5211-0AA10-0AA0)
The DMP compact module 1I NC analog is an encapsulated rapid analog input
module with 75 ms access time. It can be plugged into a slot of the NCU terminal
block as a plug-in module (maximum 4 modules per terminal block).
Fig. 8-6
S
Interfaces
S
S
Display elements
1 LED as a status display for the power supply.
LED lit:
8-106
Status
POWER
SUPPLY
LEDs
OK
Labeling
strips
ANALOG
IN
Fixing
screw
Front view and side view of a DMP compact module 1E NC analog
A 30-pole connector X1 for connection to the NCU terminal block.
4-way terminal X3 (Phoenix, Type MSTB2.5/4-ST-5.08 GREY, order no. for
X3: 18 48 407) for connecting the power supply for the analog part and 6x
terminal X2 (Phoenix, Type MSTB2.5/6-ST-5.08 GREY, order no. for X2: 17
87 076) for connecting the analog input.
The terminals are pluggable and can be mechanically coded by the
customer.
internal power supply OK
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
P1 P2 M1 M2
2.5
24 V DC
0 V
X3
Connecting terminals
S1
X1
1 1
3 2 2
6 . . 1
X2
Terminal:
6, 1 Shield
2
2,5
3
4
5
Copyright © Siemens AG 2006
S2
Ground
Analog input In+
Analog input In–
Ground