Dmp Compact Module 1I Analog (6Fc5111-0Ca04-0Aa0) - Siemens SINUMERIK 810DE powerline Equipment Manual

8.4

DMP compact module 1I analog (6FC5111-0CA04-0AA0)

The DMP compact module 1I analog is an encapsulated module. It can be
plugged into a slot of the NCU terminal block as a plug-in module. (Maximum of
4 modules per terminal block) The conversion time is a max. of 60 ms in the
rated range and a max. of 80 ms in the overshoot range.
Fig. 8-4
S
Interfaces
S
S
Display elements
1 LED as a status display for the power supply.
LED lit:
Jumpering
S1:
S2:
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
8.4 DMP compact module 1I analog (6FC5111-0CA04-0AA0)
Status
POWER
SUPPLY
LEDs
OK
Labeling
strips
ANALOG
IN
Fixing
screw
Front view and side view of a DMP compact module 1E analog
A 30-pole connector X1 for connection to the NCU terminal block.
4-way terminal X3 (Phoenix, Type MSTB2.5/4-ST-5.08 GREY, order no. for
X3: 18 48 407) for connecting the power supply for the analog part and 6x
terminal X2 (Phoenix, Type MSTB2.5/6-ST-5.08 GREY, order no. for X2:
17 87 076) for connecting the analog input.
The terminals are pluggable and can be mechanically coded by the
customer.
internal power supply OK
Setting of the measurement range
1–2 closed: +10 V
1–3 closed: +500 mV
Setting the line frequency
closed: for 50 Hz systems
open: for 60 Hz systems
8 DMP Compact Modules
M1 M2
P1 P2
2.5
24 V DC
0 V
X3 Connecting terminals
S1
X1
1 1
3 2 2
6 . . 1
X2
Terminal:
6, 1 Shield
2
2.5
3
4
5
S2
Current source PT100
Analog input In+
Analog input In–
Ground
8-103