Rocker Panel Removal; Rear Bumper Removal / Installation; Rear Cab Removal - Polaris RZR 170 2009 Service Manual

Rocker Panel Removal

1. Remove the (3) bolts from each side, retaining the lower
portion of the rocker panels.
2. Remove the (3) push rivets from each side, retaining the
upper portion of the rocker panels.
3. Remove the (3) fasteners from each side, retaining the
rocker panels to the front cab.
4. Remove the (4) fasteners from each side, retaining the
rocker panels to the rear side panels.
5. If removing the RH rocker panel, remove the screw
retaining the fuel valve knob and the (2) screws retaining
the fuel valve to the rocker panel.

Rear Bumper Removal / Installation

1. Remove the push rivet from each side of the rear bumper.
2. Remove the (6) screws retaining the rear bumper to the
frame.
3. Reverse this procedure to reinstall the rear bumper. Tighten
all fasteners securely.
BODY / SUSPENSION / STEERING

Rear Cab Removal

1. Remove the driver and passenger seats from the vehicle
(see "Seat Removal").
2. Remove the (4) fasteners retaining the front of the rear cab
to the frame.
3. Remove the (2) fasteners retaining the top portion of the
rear cab to the frame.
4. Remove the (2) push rivets from each side, retaining the
rear side panels to the rear cab.
5. Remove the (4) fasteners from each side, retaining the rear
side panels to the rocker panels.
6. Remove the (8) remaining fasteners retaining the rear cab
and rear bumper to the frame.
7. Remove the rear cab from the vehicle as an assembly.
8. Reverse this procedure to reinstall the rear cab. Tighten all
fasteners securely.
Body Component Fasteners:
16 in. lbs. (1.8 Nm)
= T
5.5
5