Kenwood AT972A Instructions Manual page 3

116143 Iss 1 LV AT970A_AT974A Eng_Fre_Sp:Blender template multi Iss
before using your Kenwood
attachment
Read these instructions carefully and
G
retain for future reference.
Remove all packaging and any
G
labels.
before using for the first time
Wipe clean with a damp cloth. Do
G
not immerse in water.
key
adjustable knob
pasta feed roller
flat pasta attachment
oultet catch
slow speed outlet cover
to assemble
1 To remove the slow speed outlet
cover, slide the catch then pull off.
2 Hold the catch back and insert the
attachment into the outlet drive and
turn until the drive clicks into place -
you may have to turn it both ways.
When the drive is engaged, rotate
the attachment so that the pin is in a
vertical position, then engage the pin
into the slot.
3 Release the catch.
to use your pasta maker
1 Make your pasta dough. Follow one
of the dough recipes supplied.
2 Set the adjustable knob on the side
of the pasta attachment to number 1
by pulling the knob out and turning.
3 Flatten a piece of dough and sprinkle
some flour between the rollers.
4 Turn the kitchen machine to speed
1 (you will see the rollers turning).
5 Pass the piece of dough through the
rollers repeating until you get a
smooth surface. (Folding the dough
in half across its width or length
between rollings will help to achieve
this).
6 Adjust the knob progressively from 1
to 9, each time re-feeding the dough
through the attachment to achieve
the desired thickness
thickness using settings 5 to 7 is
recommended.
7 Cut the rolled pasta into
desired/manageable pieces.
Use as required.
using an additional
attachment
tagliatelle
tagliolini
trenette
and spaghetti
1 To use these attachments you must
have rolled out pasta using the flat
pasta attachment (AT970A) first.
2 To fit any of the additional
attachments available, follow the "to
assemble" instructions.
3 Feed the rolled out pasta through
the pasta attachment and the
different cutters will slice the pasta to
create different pasta variations
4 Pasta can be left for up to 4 hours
before cooking.
to cook pasta
1 Bring a pan three quarters full of
water to the boil. Add salt to taste.
2 It is optional to add a small amount
of olive oil to the water, this may help
prevent the pasta from sticking.
3 Add the pasta and gently boil for
approximately 2 to 4 minutes to
taste.
cleaning
Don't wash any part in the
dishwasher.
1 Slide the slow speed outlet catch
and at the same time remove the
attachment from the mixer.
2 Wipe clean with a damp cloth. Do
not immerse in water.
Any other servicing should be
G
performed by an authorized service
representative.
. Pasta
3
,
(AT971A)
(AT972A),
(AT973A)
(AT974A)
.