Troubleshooting - Silvercrest TLG 500 B1 Operating Instructions Manual

Troubleshooting

In this section you will receive important information for the localisation and
remedying of malfunctions.
Malfunction causes and remedies
The following table will help with localising and remedying minor malfunctions:
Defect
The battery
charger is not
functioning.
The inserted
batteries are not
being charged.
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Services.
Appendix
Information regarding the EC Declaration of Conformity
With regard to conformity with essential requirements and
other relevant provisions, this device complies with the
guidelines of the Electromagnetic Compatibility Directive
2014/30/EU as well as the Directive for Low Voltage
Devices 2014/35/EU.
The complete original Declaration of Conformity can be
obtained from the importer.
│ GB │ CY
■ 10
Possible cause
The power cable is not
plugged in.
Mains power socket is not
supplying power.
The batteries are not inserted
as per their polarity.
The inserted batteries are
not suitable for charging.
The temperature monitoring
was initiated.
Solution
Insert the power cable into a mains
power socket.
Check the circuit fuse.
Insert the batteries as per their polarity
(see marking in the loading slot
Insert exclusively rechargable Ni-Cd
and Ni-MH batteries of the types
AAA/AA/C/D and 9 V Block batteries.
Disconnect the plug from the mains
power socket and allow the device to
cool down.
).
TLG 500 B1