ABB PQFM Instruction Manual page 10

For multiple cubicles mounted on a base frame, lifting rods (not provided) should be
used.
PQFM-cubicles must always be transported vertically.
Plate versions (IP00) of filters may be lifted horizontally or vertically. This is done by
attaching lifting hooks to the holes provided at the top and bottom left and right corners
of the IP00 plate.
Table 1: Maximum allowed ambient conditions during transportation
Temperature
Relative humidity
Contamination levels (IEC 60721-3-3)
10 Upon Reception ç Manual Power Quality Filter PQFM
Figure 1: Lifting a single PQF cubicle by using the lifting lugs
Figure 2: Lifting a PQF cubicle assembly by using lifting rods
Transportation (in the protected package)
-25 to 70°C (-13 to 158°F)
Max. 95%
Chemical class 3C3 (a)
Mechanical class 3S3 (b)