Sharp SW-100T Instruction Manual page 4

 Never adjust the wire brush or remove chips while the saw blade is still
running. It is extremely dangerous if hands or clothing are caught by the
running blade.
 Stop the saw blade before you clean the machine. It is dangerous if hands or
clothing are caught by the running blade.
 Never start the saw blade unless the workpiece has been clamped firmly. If
the workpiece is not securely clamped, it will be forced out of the vise during
cutting.
 Take preventive measures when cutting thin or short pieces from the work to
keep them from falling. It is dangerous if the cut pieces fall.
 Use roller tables at the front and rear sides of the machine when cutting long
work. It is dangerous if the work piece falls off the machine.
 Turn off the shop circuit breaker switch before performing maintenance on
the machine. Post a sign indicating the machine is under maintenance.