Automate Voice Mail; Write Down Voice Mailbox Number And Process; Setup Voice Mail With Dialing Codes - Nokia 6012 User Manual

Once you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.

Automate voice mail

You can insert special characters called dialing codes into phone numbers such as voice
mail, and save the number to a 1-touch dialing location. Dialing codes instruct the
receiving system to pause, wait, bypass, or accept the numbers that follow them in the
dialing string.
Note: Voice mail services vary by service provider. The following instructions
are examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.

Write down voice mailbox number and process

1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in mind
that each voice mail service may vary. However, it should look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
Be precise; you will need this information in Setup voice mail with dialing codes, 36.
Insert dialing codes
Press the * key repeatedly to cycle through dialing codes. Once the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press the Talk key before sending the numbers or codes that follow.

Setup voice mail with dialing codes

1. At the start screen, select
2. Scroll to an (empty)
3. Enter your voice mailbox number, including the area code.
Contacts > 1-touch
1-touch dialing slot and press Assign.
36
dialing.
Copyright © Nokia 2004