Receive Data Or Fax Calls; Data Transfer - Nokia 6012 User Manual

2. Enter your security code, and press OK. See Security code, 60 for more information.
3. Scroll to the calling card of your choice, select
4. Press the End key to return to the start screen; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when you
make a calling card call.
See your calling card for instructions.
5. Press and hold the Talk key for a few seconds until
6. When you hear the tone or system message, press OK.

Receive data or fax calls

Data or fax calls is a network service. See Network services, 6 for more information.
If your wireless service provider supports this feature, you can set up the phone to send
or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface with
the keypad facing downward. Do not move the phone by holding it in your hand during a
data call.
Note: For more information on connectivity, refer to the PC/PDA Connectivity
Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia
website at http://www.nokia.com/us.
1. At the start screen, select
Incoming data/fax
2. Select one of the following options:
Normal—The phone receives incoming calls as usual.
Data calls only—The phone receives only data calls.
Fax calls only—The phone receives only fax calls.
3. When you are finished receiving the fax or data call, repeat Steps 1 and 2 and select
Normal.

Data transfer

You can view the transmission speed when sending or receiving data or fax calls.
At the start screen, select
display > Graphic or Off.
Menu > Settings
call.
Menu > Settings
Options > Select
Card call
> Call settings >
> Call settings > Data/fax calls
50
> OK.
is displayed.
Data/fax calls >
> Data rate
Copyright © Nokia 2004