Connecting The Headphones; Fault Rectifi Cation; Fault Causes And Rectifi Cation - Silvercrest SKAK 120 A1 Operating Instructions Manual

Connecting the headphones

The headphones 1 are equipped with a 3.5 mm jackplug. Many
electronic entertainment devices are provided with an appropriate
headphone socket. If your audio device has been equipped with
a diff erent headphone connector, you may need to use a suitable
adapter (not supplied).
Fault rectifi cation
Fault causes and rectifi cation
The following table will help with localising and remedying minor
malfunctions:
Defect
No sound
coming from
headphones
1.
Sound is only
coming from
one side of the
headphones
1.
NOTE
► If the malfunction cannot be remedied with the described
solution proposals or if other types of malfunctions occur
please contact our service department (see chapter Service).
SKAK 120 A1
Cause/remedy
The volume control of the playback device is set
to the minimum volume.
Increase the playback volume.
The 3.5 mm jackplug is not fully inserted into the
playback device's headphone socket. Push the
3.5 mm jackplug all the way into the socket.
The 3.5 mm jackplug is not fully inserted into the
playback device's headphone socket. Push the
3.5 mm jackplug all the way into the socket.
The Stereo-Balance-Control on the playback
device is incorrectly adjusted. Adjust it to the
setting you desire.
GB
IE
9