Lenovo ThinkSystem SR630 Product Manual page 30

M.2 Enablement Kit configuration notes:
The M.2 Enablement Kit (7Y37A01092) supports one M.2 SATA SSD which is connected to the SATA port
on the Intel Platform Controller Hub (PCH). If the M.2 kit is used, an M.2 SSD is required (no support for
the kit without SSD installed).
The M.2 with Mirroring Enablement Kit (7Y37A01093) is connected to the Intel PCH via the PCIe link, and
the kit supports two M.2 SATA SSDs that can be configured in a RAID-1 or RAID-0 drive group, or they
can operate as two separate drives. If the M.2 mirroring kit is used, two M.2 SSDs of the same capacity
are required.
The following tables list supported internal storage configurations with the SAS/SATA and AnyBay backplanes.
Table 15. Internal storage configurations: 2.5-inch front drive bays
Drive bay configuration
8x 2.5" chassis (Feature code AUW0)
8x 2.5-in. SAS/SATA hot-swap (front)
8x 2.5-in. SAS/SATA hot-swap (front) +
2x 2.5-in. SAS/SATA hot-swap (rear)
10x 2.5" chassis (Feature code AUW1)
6x 2.5-in. SAS/SATA +
4x 2.5-in. AnyBay hot-swap (front)
6x 2.5-in. SAS/SATA +
4x 2.5-in. AnyBay (NVMe only)
hot-swap (front)
6x 2.5-in. SAS/SATA +
4x 2.5-in. AnyBay hot-swap (front) +
2x 2.5-in. SAS/SATA hot-swap (rear)
10x 2.5-in. U.2 NVMe hot-swap (front)
* The number in brackets (x) specifies the quantity of drive bays connected to each of the controllers.
Lenovo ThinkSystem SR630 Server
Backplane kit
type and
quantity
Storage controller type and quantity*
1 0 0 0 1x RAID 530/730/930-8i (8)
1x 430-8i HBA (8)
1 0 0 1 1x RAID 930-16i (10)
1x 430-16i HBA (10)
0 1 0 0 1x RAID 930-16i (10) + Onboard NVMe (4)
1x 430-16i HBA (10) + Onboard NVMe (4)
0 1 0 0 1x RAID 530/730/930-8i (6) + Onboard NVMe (4)
1x 430-8i HBA (6) + Onboard NVMe (4)
0 1 0 1 1x RAID 930-16i (12) + Onboard NVMe (4)
1x 430-16i HBA (12) + Onboard NVMe (4)
0 0 1 0 Onboard NVMe (4) + NVMe Switch (4) + NVMe Switch (2)
30