Health O Meter 3001KL-AM User Instructions
Antimicrobial digital platform scale
Hide thumbs
Also See for 3001KL-AM:
- User instructions (17 pages) ,
- User instructions (23 pages) ,
- User instructions (24 pages)
Related Manuals for Health O Meter 3001KL-AM
Summary of Contents for Health O Meter 3001KL-AM
-
Page 1: User Instructions
Model 3001KL-AM/3001KL-AMX Antimicrobial Digital Platform Scale User Instructions P/N UM3001KL-AM/3001KL-AMX Rev20170921_EngOnly... -
Page 2: Table Of Contents
Model 3001KL-AM/3001KL-AMX ® Thank you for your purchase of this Health o meter Professional product. Please read this manual carefully, and keep it for easy reference or training. TABLE OF CONTENTS Cautions and Warnings ..................... 3 Specifications ......................4 Certifications / Connectivity / Disposal ..............5 Assembly Instructions .................... -
Page 3: Cautions And Warnings
CAUTIONS AND WARNINGS To prevent patient/caregiver injury or damage to your scale, please follow the instructions in this user manual very carefully. Do not exceed the weight capacity specified for this scale. For accurate weighing, this scale must be placed on a flat, stable surface. ... -
Page 4: Specifications
Antimicrobial Powder Coating Unique to the 3001KL-AM/3001KL-AMX scales, the handrails and transport handle have been fabricated with a permanent, antimicrobial powder coating. The antimicrobial coating utilizes silver ionic technology to inhibit the growth of microbes. -
Page 5: Certifications / Connectivity / Disposal
USB port. This connectivity helps minimize transcription errors when recording patient data. This scale is EMR-EHR compatible. For more information regarding how to connect this ® scale to other electronic devices, please contact Health o meter Professional Scales Technical Support, available during normal business hours at 1-800-638-3722. Scale Disposal ®... -
Page 6: Assembly Instructions
13 mm box wrench, Phillips head screwdriver Note: Assembly photos in this User Instruction manual depict the gray handrails on scale model 3001KL-AM. Assembly instructions are the same for scale model 3001KL-AMX. Handrails for the 3001KL-AMX are the white handrails depicted below. - Page 7 ASSEMBLY INSTRUCTIONS Health o meter® Professional Scales recommends that assembly is performed by two people. Warning: Do not drop scale, as this can permanently damage the load cells. 1. Remove the scale platform from the carton and place scale platform on a flat, level, and dry surface with the bottom facing up.
- Page 8 ASSEMBLY INSTRUCTIONS 4. Tip the platform and handrails back to an upright position. Fasten the handrail to the platform using the (8) included M8x20 bolts (4 bolts per each handrail support). Use the included 13mm box wrench to tighten the bolts. 5.
- Page 9 ASSEMBLY INSTRUCTIONS 7. Plug the load cell connector cable into the load cell port on the rear of the display head. 8. Attach the adapter holder to the handrail using the (2) included sheet metal screws. Use a Phillips head screwdriver to tighten the screws.
-
Page 10: Set-Up Instructions
AC adapter into the power source. Warning: To avoid a safety hazard, do not use an unspecified AC adapter. Only use the Health o meter® Professional AC adapter model ADPT30 designed for this scale. Power Adapter Jack 2. -
Page 11: Operating Instructions
OPERATING INSTRUCTIONS Keypad Function Description ON/OFF Powers scale on and off. ZERO Zeros the scale prior to a weighing. Holds the weight value of the patient on the display until the button HOLD/RELEASE is pressed again to clear the value. Also moves the cursor from left ►... - Page 12 OPERATING INSTRUCTIONS (CONT) Unit of Measure Configuration The scale ships from the factory locked in “KG” mode. In this configuration, the scale will power up and exclusively display the patient’s weight in kilograms. Depressing the UNIT button will not change the Unit of Measure (UOM). 1.
- Page 13 OPERATING INSTRUCTIONS (CONT) movement of the patient on the scale, it may take several seconds for the scale to lock onto the weight. 5. After obtaining the patient’s weight, and with the patient remaining on the scale, press the BMI button. 6.
- Page 14 Parent/Child Function The Parent/Child function on Health o meter® Professional scales provides the convenience of weighing a small child or infant while being held by a parent. Follow these simple steps to subtract the parent’s weight from the total so only the child’s weight is displayed.
-
Page 15: Maintenance
Maintenance The following pages provide instructions for maintenance, cleaning, calibration, and troubleshooting for the 3001KL-AM/3001KL-AMX scales. Maintenance operations other than those described in this manual should be performed by qualified service personnel. Caution: Before first use, or after long periods of non-use, check the scale for proper operation and function. -
Page 16: Calibration
CALIBRATION This scale has been factory calibrated, and does not require calibration prior to use. Calibration of your 3001KL-AM/3001KL-AMX scale can be performed using calibrated kilogram (kg) or pound (lb) weight standards. The required calibration standard will be the Unit of Measure (UOM) for which the scale is configured. -
Page 17: Troubleshooting
TROUBLESHOOTING Troubleshooting Before contacting service personnel, refer to the following instructions to check and to correct any failures. Symptom Possible Cause Corrective Action 1. Dead Battery 1. Replace batteries 2. Faulty electrical outlet 2. Use a different outlet Scale does not power on 3. -
Page 18: Warranty
® Health o meter Professional products are manufactured, designed, and owned by Pelstar, LLC. ® We reserve the right to improve, enhance, or modify Health o meter Professional product features or specifications without notice. © Pelstar, LLC 2017 P/N UM3001KL-AM/3001KL-AMX Rev20170921_EngOnly...