Location Of Controls And Components; Main Unit - Panasonic BL-PA100A Service Manual

BL-PA100A/BL-PA100KTA

6 Location of Controls and Components

6.1.

Main unit

(1) PLC Indicator
Lights to indicate that the adaptor is connected to the HD-PLC network.
(2) LAN Indicator
Lights when a LAN cable is connected to the adaptor, and flashes when data is being sent or received.
(3) MASTER Indicator
Lights when the adaptor is configured as the master.
(4) SETUP Button
Used to register the adaptor or test the terminal is network speed.
(5) Mode Selector
The position of this selector during registration determines whether the adaptor is used as the master or as a terminal.
(6) AC IN
Connects the adaptor to AC power as well as to the HD-PLC network.
(7) FACTORY DEFAULT RESET Button
Used to reset the adaptor and erase its registration.
(8) LAN Jack
Connects the adaptor to a network device, such as a broadband router, hub, computer, etc.
(9) MASTER Seal (BL-PA100KTA: master adaptor only)
Indicates which adaptor is pre-configured as the master adaptor.
10