Specifications - Panasonic BL-PA100A Service Manual

BL-PA100A/BL-PA100KTA

3 Specifications

All specifications are subject to change without notice.
Power Line Communication interface
Standard
Actual transmission
speed
Maximum recommended
no. of adaptors per
network
Maximum recommended
no. of network devices
connected to an adaptor
*1 Results may vary depending on electrical conditions, network environment, and other factors. For information on how trans-
mission speed is measured, access the Panasonic PLC Support Site at: http://panasonic.co.jp/pcc/products/en/plc/
*2 Using Linux FTP.
*3 Performance may be affected as more adaptors are added to the network.
*4 Connecting more network devices to an adaptor may increase network traffic and affect performance.
LAN interface
Standard
Interface
Protocol
Access method
User interface
Indicators
Other
General
Operational environment
Dimensions (W x D x H)
Weight
Power supply
Power consumption
HD-PLC interface
Frequency band
Modulation
Transmission PHY rate
Access method
Error correction
Encryption
Communication distance
*1 This is the theoretical maximum data transmission speed of the HD-PLC standard.
*2 Varies depending on the electrical environment.
HD-PLC
UDP: Max. 70 Mbps
*1 *2
TCP
16 (including the master)
*3
8
*4
IEEE 802.3/IEEE 802.3u
10 Base-T
100 Base-TX
Auto MDI/MDI-X
IPv4, IPv6, TCP, UDP
CSMA/CD
PLC (blue, red)
LAN (green, orange)
MASTER (green)
Mode Selector (MASTER or TERMINAL switch)
SETUP button
FACTORY DEFAULT RESET button
0-40 °C (32-104 °F)
20%-85% humidity (without condensation)
Approx. 121 mm x 40 mm x 70 mm
(4 3/4" x 1 9/16" x 2 3/4")
240 g (0.53 lb.)
Input 120 V, 60 Hz
4 W
4-28 MHz
Wavelet OFDM (16 PAM-2 PAM)
Max. 190 Mbps
CSMA/CA
TDMA
Reed-Solomon encoder/decoder
Convolutional encoder/Viterbi decoder
AES 128-bit encryption
Approx. 150 m (490 ft.)
: Max. 42 Mbps
*1
*2
6