Help Guide | Starting To Record Automatically In Response To Sound – The Vor Function - Sony ICD-PX333F Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
FM radio (ICD-PX333F only)
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-PX333/PX333F
Back Back to Top
Starting to record automatically in response to sound
– the VOR function
You can set the VOR (Voice Operated Recording) function to "ON," to make the IC
recorder start recording when the IC recorder detects sound, and pause when no
sound is heard, eliminating recording during soundless periods.
1. In the stop or recording mode, select DISP/MENU - "VOR," and then press
PLAY/STOP·ENTER.
2. Press – or + to select "ON," and then press
"VOR" is set to "OFF" when you purchase the IC recorder.
3. Press (stop) to exit the menu mode.
4. Press REC/PAUSE.
"VOR" and " " appears in the display window.
The recording pauses when no sound is detected and "PAUSE" flashes. When
the IC recorder detects sound again, the recording starts again.
Note
The VOR function is affected by the sound around you. Set "Mic Sensitivity" in
the menu according to the recording conditions. If recording is not satisfactory
after you have changed the "Mic Sensitivity" setting, or for an important
recording, set "VOR" to "OFF" in the menu.
During FM recording, the VOR function does not work (ICD-PX333F only).
Hint
To cancel the VOR function, set "VOR" to "OFF" in step 2.
Related Topic
Recording FM radio broadcasts (ICD-PX333F only)
Using the menu
Selecting the microphone sensitivity (Mic Sensitivity)
122
Search
Print
PLAY/STOP·ENTER.
Go to Page Top