Lenovo ThinkStation P500 Configuration Manual page 13

How to create and configure raid arrays

Hide thumbs Also See for ThinkStation P500:

Configuring RAID arrays using the Avago controllers

Legacy BIOS Method – Setting up a RAID array

***Note: in order for the OS to recognize drive(s) attached to the Avago controller, the drive(s) must be

configured as a RAID array or JBOD mode. Single drive RAID 0 arrays are acceptable.

Use this method to create a basic RAID array using the Avago MegaRAID SAS/SATA FLEX RAID Adapter or

Avago 9364-8i adapter with the system BIOS set to Legacy mode.

1. Install the desired drives and Avago controller into the system (see "P500/P510-P700/P710-

P900/P910 RAID Hardware Configuration" document for installation instructions).