2.2 Applicable system
This section describes usable modules and cables.
(1) Modules connectable on the branch line side
The types of the modules connectable on the branch line side of the
AJ65BTS-RPH are shown below.
Table 2.1 Modules connectable on the branch line side
Category
Slave station
Repeater
Bridge
(2) Applicable communication cables
The communication cables connectable to the AJ65BTS-RPH are
shown below.
Connector
name
Trunk line side
Branch line side
POINT
The master station and stand by master station can not be connected
to the branch line side.
Remote I/O station
Remote device station
Intelligent device station
Local station
AJ65BTS-RPH
AJ65FBTA-RPH
AJ65SBT-RPT
AJ65SBT-RPS/RPG
AJ65BT-RPI-10A/10B
AJ65SBT-CLB
Table 2.2 Applicable communication cables
CC-Link version
Ver.1.00
Ver.1.10
Ver.1.00
Ver.1.10
Module types
Applicable cable
Name
CC-Link dedicated
high-performance cable
CC-Link dedicated cable
CC-Link dedicated cable
CC-Link dedicated cable
CC-Link dedicated cable
4
Terminal
resistance
Ω
130
Ω
110