Connection Panels (Front/Rear); Mm Sockets; Charger; Epm - GE Druck PC6-IDOS User Manual

1.3 Liquid Crystal Display (LCD)
The LCD is a 16 character x 2 line alphanumeric LED
backlit display which is capable of displaying special
characters.
Pressure reading
Special
Symbols
Function

1.4 Connection Panels (Front/Rear)

Front connection panel: (See Page 4, Fig 1)
This connection panel provides input / output connections as
detailed in Fig.1

1.4.1 4 mm sockets.

mounted on the front panel provide
and voltage and switch status.
Voltage outputs of 10 and 24V are available for use with
sensors, transducers, transmitters, etc.
K0354, Iss. 1
Unit of measurement
Function Value
Six standard 4 mm electrical sockets
input or output current
Rear connection panel:
(See Page 4, Fig 2)
1.4.2 'Quick Fit' coupling.
connections are made to
connectors / 1/4BSP or 1/4NPT female
adaptors.
1.4.3 RS232. An 8 way circular miniature
connector is used for communication with
RS232 standard communication
protocols/equipment. The user software
' SiCal PRO ' (optional) can be used to
remotely monitor or download/upload data
from the PC6-IDOS via this connector.
(Optional RS232 cable - Part No. 01-0625)

1.4.4 Charger.

The 2 way circular miniature
connector is used for the 9V charger/power
supply (provided).

1.4.5 EPM.

The 5 way circular miniature
connector is used to connect to the EPM
(External Pressure Module). These optional
modules cover pressure ranges from 0.07 to
700 bar (1.0 to 10,000 psi).
Note: This connector will not be available
on a dual (internal) sensor unit.
COUPLING
Pressure input
'Quick-fit'
RS232
9V DC
P2
Page 3