Table of Contents
Advertisement
1.13 File
This function allows the user to view, export, import and
delete previously stored files.
To use the filing system proceed as follows:
•
Switch the unit on.
•
Press the
key once and scroll to 'File' using the
MENU
key and press
1.13.1
To view a file, proceed as follows:
•
Select 'View' using
•
The latest filename is shown in the bottom left hand side
of the display. The record count is shown in the bottom
right hand side. To select this file press
file is required then scroll through the filenames using
the
keys and then press
•
To move through the record now selected, press the
key or the
key. This will first show the
ENTER
ZERO
'IPM / EPM' serial number from which data was read.
•
To view the following records in the selected file use the
or
key to advance to the next screen.
ENTER
ZERO
K0354, Iss. 1
.
ENTER
ZERO
key and press
.
ENTER
ZERO
. If another
ENTER
ZERO
key.
ENTER
ZERO
Number of records
'N' = Normal Log
'C' = Calibration procedure
Transducer accuracy
(e.g. 253 = 0.025%)
Date & Time
Pressure Data
2nd line function
Next reading
Time & Date
Pressing the
or
ENTER
ZERO
through the records. Once the last record has been viewed
an **END** message is displayed.
The records then 'wrap around' so the user can move to the
first or last file record using the
Note:
At the time of logging, if the pressure is above or
below the set limits then a 'High' or 'Low' message will
appear after the Pressure Data screen.
key will enable the user to go
keys.
One
Complete
Reading
Page
18
- Quick Links:
- Specifications Maintenance
Hide quick links:
Advertisement
Table of Contents
