Appendix B
Sample Configurations
Figure B-4
Management host
See the following sections for the configurations for this scenario:
•
•
•
•
•
Example 4: System Configuration
You must first enable multiple context mode using the mode multiple command. The mode is not stored
in the configuration file, even though it endures reboots. Enter the show mode command to view the
current mode.
firewall transparent
hostname Farscape
password passw0rd
enable password chr1cht0n
asdm image disk0:/asdm.bin
boot system disk0:/image.bin
admin-context admin
interface gigabitethernet 0/0
OL-10088-01
Example 4
Admin Context
outside
10.1.1.1
10.2.1.75
inside
10.1.1.3
192.168.1.1
Admin
Network 2
Example 4: System Configuration, page B-13
Example 4: Admin Context Configuration, page B-14
Example 4: Customer A Context Configuration, page B-15
Example 4: Customer B Context Configuration, page B-15
Example 4: Customer C Context Configuration, page B-16
Example 4: Multiple Mode, Transparent Firewall with Outside Access
Internet
customerA
customerB
outside
outside
10.1.2.1
10.1.3.1
inside
10.1.2.3
192.168.2.1
customerA
Network 2
Cisco Security Appliance Command Line Configuration Guide
10.1. n .2
customerC
outside
10.1.4.1
inside
inside
10.1.3.3
192.168.3.1
customerB
customerC
Network 2
Network 2
10.1.4.3
192.168.4.1
B-13