Registering Another Mobile Device; Registering Other Devices To The Hub - Panasonic KX-HNB600 Systems Setup Manual

Registering another mobile
device
In order to access the system from a mobile
device, you must first register the mobile
device to the hub. You can register up to 8
mobile devices to a hub.
Confirm the following before you begin.
– Make sure you have completed the initial
setup procedure
– Make sure your mobile device can connect
to the Internet
– Make sure your wireless router and the hub
are turned on
– Make sure your mobile device and the hub
are connected to the same wireless router
1
Using the mobile device that you want to
register, download the [Home Network]
app and then start the app.
R If prompted, follow the on-screen
instructions and select the appropriate
region/country.
R If prompted to select the device to be
set up, tap [Hub].
2
When prompted, tap [Add This Mobile
Device].
3
When prompted, press MWi-Fi SETUPN
on the hub.
R Your mobile device will be registered
to the hub.
4
When prompted, follow the on-screen
instructions and enter the password used
to log in to the hub while away from home.
5
When prompted, enter a name for your
mobile device and then tap [OK].
R This setting allows you to change the
name assigned to your device. It can
help you identify your mobile device
when performing certain operations,
such as deregistering or making
intercom calls using a cordless
handset.
R The app's home screen is displayed
when initial setup is complete.
For assistance, please visit http://shop.panasonic.com/support
HNB600_(en_en)_0124_ver.201.pdf
Registering other devices
to the hub
This procedure is not required for devices
that were included as part of a bundle.
Before you can use devices such as cameras,
sensors, and smart plugs, they must be
registered to the hub.
If you purchased devices separately (i.e., not
as part of a bundle), you must register each
device to the hub.
You can register each device by using the
registration buttons or the [Home Network]
app.
Using registration buttons
1
Hub:
Press and hold the registration button
until the LED indicator blinks slowly in
green.
R Press and hold the appropriate
2
Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the device's registration
button until the device's LED indicator
blinks slowly in green.
R When registration is complete, the hub
Note:
R If registration fails, the hub sounds several
short beeps.
R To register a mobile device, use the
procedure described on page 15.
Using the app
1
Start the [Home Network] app.
15
registration button (page 10) according
to the device you want to register.
M HANDSET/LOCATORN: For
handsets
M CAMERAN: For cameras
M OTHER DEVICEN: For other
devices
sounds one long beep.
2017/01/25
Setup
15
10:22:35