Connection Terminals And Interfaces - Siemens PXC3.E16A100A Datasheet

Connection terminals and interfaces

1, 2
4 KNX +, –
4 24 V / 2A ~, ⊥, 2 A
8 24 V~ ~, ⊥
8 24 V ~, ⊥, 6 A
F
USB
12 DALI
Service
DALI
(Without Island bus The island bus is created automatically when TX-I/O
labels)
10 / 12
Siemens
Building Technologies
2 x RJ45 interface for Ethernet (2-port Ethernet switch)
KNX PL-Link connection
Output AC 24 V for externally supplied devices with KNX
PL-Link (Short-circuit proof with PTC resistor)
Operating voltage AC 24 V
Output AC 24 V to supply other PXC3... room automation
stations (internally connected to
internal fusing)
T 10 A fuse for island bus conductor V~
USB interface
DALI bus connection
Service pin Ethernet
DALI test
devices are snapped on the standard mounting rail
PXC3.E... Room automation stations
KNX
24 V on pcb – no
*) Fitted, but no labeling and no function in this type
X X X
X X *)
X X *)
X X X
X X X
X X *)
X X X
*) X X
X X X
*) X X
X X *)
CM1N9203en_05
2015-11-23