Installation Precautions - Whirlpool HB10813 Operation Manuals

2. Installation Precautions

This product should be installed in the place where can bear the weight of this goods.
Incorrect installation may cause noise, empathy. Please assembly properly.
In order not to cause the dew flowing back from exhaust pipe to the bathroom, the
exhaust pipe should always be set in downward sloping to the outdoor.
When installing the machine, the Front Panel shall be not less than 1.8 meters off the
ground.
Not allow being installed in the hot furnace directly above and a place for more than 40
degrees.
Please set airflow intake to promote convection.
Do not change the product's rated features.
Prohibiting using any installation method beyond the specified in the user manual.
Before installing this product, please ensure that the power has been cut off.
When the flammable gas leaks, stop using it and turn off the machine and all its
function.
Do not install this product near curtains and other flammable materials to prevent any
danger.
Product installation and maintenance should be done by professional designated by
the manufacturer.
Please install a complete power cutoff switcher (refer to below diagram) which the
contact separation is more than 3mm and the capacity is more than 250V~16A to
control the power of the machine, and install the switcher outside the bathroom where
it is easily controlled.
Do not install the machine in steam sauna bathroom.
Do not install the machine where it is exposed to oil mist.
Do not install the machine in public bathroom.
Do not install the machine in a wardrobe.
Do not cover heater outlet, otherwise it may cause a fire due to overheating.
Do not install too close to the electrical outlet in order to prevent damage of the
machine, for it may cause damage of other electrical appliances.
Prohibit using any programmes or timer automatically connected to the power or any
other devices to use this product. Otherwise it will cause damage to the product, or
fire.
Do not let people in the bathroom or shower zones touch the remote control.
Do not expose this product directly under the shower.
When installing and using, do not remove the main circuit cover plate, otherwise it will
cause electric shock or fire.
- 5 -