Validation - NEC SpectraView Profiler 5 User Manual

Profiler
User Manual

3.7 Validation

After the calibration and profiling process SpectraView Profiler 5 is
processing a detailed check.
This check is a simple integrity test of the calibration and the created
profile.
This test was not designed to check if a display is able to be a softproof-
ing display. It doesn't checks if a specific gamut was achieved by the
calibration.
The basic function of this validation is to check the integrity of the profile.
It just checks if the display achieves the same values as to the time the
display calibration was processed.
This validation should be used as indicator if the calibration and the
profile is still valid or a if a new calibration/profile has to be created.
This validation should be used periodically to check if the display of the
monitor has changed over the time.
The validation of the current calibration and the current profile of the
display can be started by a click on <Validate>.Then the already known
measurement window will pop up again.
26