Settings In The Main Menu; Select System Profile - NEC SpectraView Profiler 5 User Manual

Profiler
User Manual

5.6 Settings in the main menu

SpectraView Profiler 5 additional function can be activated directly
through the main menu of the SpectraView Profiler 5.

5.6.1 Select system profile...

At startup time your computer system loads the active system profile.
Under Mac OS X the video-LUT that stores the monitor calibration infor-
mation will be downloaded into the video card. A Windows-PC needs
a separate video-LUT loader for this task. This application is being
installed to the Startup Programs folder when you install SpectraView
Profiler 5.
If you use a hardware calibrateable monitor, neither of the operating
systems provides a mechanism to download LUTs into the monitor.
Normally this information is stored in the monitor at calibration time and
stays there permanently.
If you change profiles (e.g. for different workflows - photo and video),
you need to reload the appropriate video-LUTs. SpectraView Profiler
5 lets you perform these tasks with one click. Go to the „File" menu
„Select system profile..." and navigate to the desired ICC-profile.
74