Physical Specifications; Operating Environment - Lenovo IBM UPS5000 Product Manual

Features
The IBM UPS5000 HV uninterruptible power supply includes the following features and capabilities:
High efficiency 5KVA (4.5 kW) UPS for increased rack power density.
Occupies only 3U of vertical rack space.
Eight C13 and two C19 receptacles with 20A circuit breaker protection.
Requires a 200 V to 240 V, 30-32 A single-phase circuit.
Advanced technology Double Conversion operation providing protection from four more power
failures than typical interactive UPS technology.
Bimodal operation provides 97% efficiency when Double Conversion protection not required.
Hot swap battery capability increases availability.
Optional Online Battery Packs for additional runtime capacity. With four external battery packs, the
UPS can supply up to 75 minutes of run time at full load. Up to 10 external battery packs can be
attached to the UPS.
A suite of easy-to-use management tools.
Network Management Card provides standard serial and Ethernet (10/100 MBps) communications
as well as connections for environmental management. A temperature sensor on a 13 foot cable is
supplied with the UPS. Additional sensors can be purchased from APC using part number AP9335T.
Emergency Power Off option to remotely power off UPS unit to prevent battery operation during
power failure.
Load: Up to 5000VA or up to 4500W.

Physical specifications

Height: 130 mm (5.1 in)
Width: 483 mm (19.0 in)
Depth: 660 mm (26.0 in)
Weight: 59 kg (130 lb)

Operating environment

IBM UPS5000 HV Uninterruptible Power Supply for IBM System x 4