Camera Operation; Zoom Function; Backlight Compensation Function - Panasonic AG-CK10P Operating Instructions Manual

Camera operation

Zoom function

The camera has the capability for optical zoom (x22) and digital zoom (x10).
The zoom function is controlled with the [W] button and the [T] button.
The maximum zoom factor is x220.
Note:
When zooming in on a subject from the wide end, zooming automatically
pauses at the x22 limit of the optical zoom. To zoom beyond this limit with
the digital zoom, release the zoom button momentarily and press it again,
holding it down until the desired zoom factor is reached.
Auto zoom function
When you press the [AUTO ZOOM] button, the camera will automatically zoom
in, pause for a certain period, and zoom out.
Refer to the Operating Instructions of the Remote Control Panel for the setup
procedures for zooming and stop time.

Backlight compensation function

When you press the Backlight compensation button, the backlight compensation
function is activated. Each push of the button toggles the function between ON
and OFF.
Light button
Pressing this button activates the camera operation button illumination.
Press this button to switch between lit and unlit.
E-8