Inserting Batteries - Sony HVL-F45RM Operating Instructions Manual

Inserting batteries

The flash unit can accommodate either set of the following:
• Four AA-size alkaline batteries
• Four AA-size rechargeable nickel-metal hydride (Ni-MH) batteries
Before you use the rechargeable nickel-metal hydride batteries, be
sure to fully charge the batteries with the specified battery charger.
No batteries are supplied with the flash unit.
1
Push and slide the battery chamber door in the
direction of the arrow shown below.
2
Insert the batteries into the battery chamber as
illustrated (
( indicate the direction of the batteries.)
3
Close the battery chamber door.
Slide the door in the reverse direction of the arrow in step 1.

).
GB
13
GB