GE DMS Go+ Operating Manual page 59

Power supply
– Place the battery in the battery compartment so that
the marking faces upwards and the contacts are
pushed against the connector pins (1).
– Insert the cover of the battery compartment with the
side opposite to the screws at first, and push the
lugs (3) into the housing recesses.
– Press the cover firmly down on the side of the screws
and turn the two screws (2) clockwise by one quarter
of a turn each in order to lock the cover.
DMS Go+
1
Edition 4 (05/2014)
3 Initial start-up
2
3
3-5