Usb Driver Program - Sanyo DMP-M400SD Instruction Manual

Installing the USB driver for Windows 98SE
If you are using Windows 98SE, you need to install the USB driver.
- There is no need to install the USB driver, if you are using Windows XP/
2000/ME.
- Reproduction of this driver is forbidden.
- This driver shall not be copied and reprinted.
- SANYO shall not be liable for any damages arising out of the use of this driver.
1. Turn on your PC and Windows is started. Do not connect the unit to the PC yet.
2. Load the USB driver CD-ROM (supplied) in the CD-ROM drive of the PC. [USB
Mass Storage Driver Setup] screen appears automatically.
Note:
- If the screen is not displayed, right-click [Start], select [Explore].
Double click "Setupapp.exe" file in the CD-ROM. [USB Mass Storage Driver
Setup] screen appears.
- Click [Uninstall] to remove the USB driver program from your PC.
GB-9

USB Driver Program

[ENGLISH]