Control Panel And Features - Kenmore 110.6163*610 Use & Care Manual

POWER BUTTON
1
a cycle at any time.
CYCLE KNOB
2
Use your cycle knob to select available cycles on your dryer.
Turn the knob to select a cycle for your laundry load. See
"Cycle Guide" for detailed descriptions of cycles.
Timed Cycles
models with a selectable temperature button, you may choose
a setting based on the fabrics in your load. Drying time and
temperature will vary depending on your dryer model.
Sensing Cycles
Sensing cycles give the best drying in the shortest time.
Drying time will vary based on fabric type, load size,
and dryness setting.
LED DISPLAY AND SETTINGS
3
When you select a cycle, its default settings will light up and
the Estimated Time Remaining (for Sensing Cycles) or actual
time remaining (for Timed Cycles) will be displayed.
Touch the setting names next to the display to adjust settings.
See "Cycle Guide" for available settings on each cycle.
Not all settings are available with all cycles.
Dry Temp
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the higher
setting. See "Cycle Guide."
NOTE: Sensing Cycles allow temperature adjustment. At most,
4 of the available temperatures (not including Air) are allowed.
Dry Level
You may adjust the Dry Level on Sensing Cycles (except
for the Sanitize and Steam Refresh cycles) if desired.
NOTE: Dry Level is for use with Sensing Cycles only.
Cycle Signal
The Cycle Signal produces an audible sound when the
end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Guard™ option is selected and
the Cycle Signal is on, the tone will sound at 15 minutes,
30 minutes, and at the end of Wrinkle Guard™.
NOTE:
a cycle is selected or when a feature or option is touched.
Touch and hold CYCLE SIGNAL for about 3 seconds to

CONTROL PANEL AND FEATURES

1
Not all features and options are available on all models. Appearance may vary.
2
7
TIME ADJUST FOR TIMED CYCLES ONLY
4
Use "+" and "–" with Timed Cycles to increase or decrease
the length of a Timed Dry or Express cycle.
OPTIONS
5
Use to select available options for your dryer. Not all cycles
and options are available on all models.
Energy Saver option
Activate the ENERGY SAVER setting to increase your
energy savings. This setting uses a lower heat level and
extends cycle time. Turn on for optimal energy savings.
available for the Normal cycle and will default on.
NOTE: Energy savings may vary across loads.
Drum Light
Select Drum Light to turn on the light inside the dryer
drum. When touched during a cycle or not running, the
Drum Light turns on and will remain on until DRUM LIGHT
is touched again, the door is opened and closed, or the
door is left open for 5 minutes.
Touch DRUM LIGHT at any time to turn the drum light on
Damp Signal
selected, a series of beeps will sound when the load is
damp but not completely dry. This will allow you to take
clothes out of the load that do not need to dry completely.
This signal can also be used as a signal to rearrange the
load when drying large bulky items that do not tumble
well, such as comforters. This option is not available on
Sanitize, Steam Refresh, and the Timed cycles.
Wrinkle Guard™ or Wrinkle Guard™
When you are unable to remove a load of clothes
from the dryer as soon as it stops, wrinkles can form. The
Wrinkle Guard™ option periodically tumbles, rearranges,
Depending on cycles and settings, this option will add
a short steam cycle after 60 minutes to help smooth
out wrinkles.
Get up to 150 minutes of heat-free, periodic tumbling
at the end of a cycle. Touch the WRINKLE GUARD™
cycle has ended.
NOTE: If you open the dryer door prior to the end of
the Wrinkle Guard™ option, the dryer will go into Pause
mode. You will need to touch
or touch
option. If paused for 5 minutes, the dryer will time out to
Standby; touch
option.
3
5
4
to continue the Wrinkle Guard™
to continue the Wrinkle Guard™
6
5