Step
Task
Attach the bar to the equipment rack brackets using the mounting screws
3
provided by the rack manufacturer.
Installing the Chassis in a Two-Post Rack
Step
Task
If you are center or rear mounting the chassis in a 19-inch rack, make
1
sure that the mounting brackets are properly positioned.
If your are mounting the chassis in a 23-inch rack, install the 23-inch
adapters.
Using a hand cart, pallet jack, or forklift, align the rack-mount holes
2
with the equipment rack holes, situating the chassis on top of the
equipment rack shelf bar.
Insert rack mounting screws in the holes that are not obscured by the
3
front shipping cover. Tighten the screws.
Loosen and remove the screws attaching the front shipping cover.
4
Remove the cover.
Insert the remaining rack mounting screws and tighten to secure the
5
chassis in the rack.
6
Installing the Hardware