Siemens SIMATIC S7-400 Operating Instructions Manual page 116

Programming the OPC UA client blocks
5.10 Error numbers
Done Error ErrorID (hex) Name
0 1 80BD0000
0 1 80BE0000
0 1 80C10000
0 1 80C20000
0 1 80C30000
0 1 80C40000
0 1 80C50000
0 1 80C90000
0 1 80CA0000
0 1 80CB0000
0 1 80CC0000
0 1 80CD0000
0 1 80CF0000
0 1 80D00000
0 1 80D10000
0 1 80D20000
0 1 80D30000
0 1 80D40000
0 1 80D50000
0 1 80D60000
0 1 80DB0000
0 1 80D70000
0 1 80D80000
0 1 00D90000
0 1 80DA0000
0 1 810D0000
Error numbers of PLCOpen for OPC UA
0 1 A0000001
116
BadInvalidTimestamp
Argument
BadProtocolVersion
Unsupported
BadFilterOperatorInvalid
BadFilterOperator
Unsupported
BadFilterOperandCount
Mismatch
BadFilterElementInvalid
BadFilterLiteralInvalid
BadViewTimestampInvalid
BadViewParameterMismatch The view parameters are not consistent with each other.
BadViewVersionInvalid
BadConditionAlready
Enabled
BadDialogNotActive
BadConditionBranch
AlreadyAcked
BadConditionBranch
AlreadyConfirmed
BadCondition-
AlreadyShelved
BadConditionNotShelved
BadShelving-
TimeOutOfRange
BadAggregateListMismatch
BadAggregateNotSupported
BadAggregateInvalidInputs
BadTooManyMonitoredItems The request could not be processed because there are too
BadBoundNotFound
BadBoundNotSupported
GoodDataIgnored
BadAggregateConfiguration
Rejected
BadCertificateChain
Incomplete
PLCopenUA_Bad_FW_
PermanentError
Meaning
The defined timestamp to return was invalid.
The applications do not have compatible protocol versions.
An unrecognized operator was provided in a filter.
A valid operator was provided, but the server does not pro-
vide support for this filter operator.
The number of operands provided for the filter operator was
less than expected for the operand provided.
The referenced element is not a valid element in the content
filter.
The referenced literal is not a valid value.
The view timestamp is not available or not supported.
The view version is not available or not supported.
This condition has already been enabled.
The dialog condition is not active.
The condition branch has already been acknowledged.
The condition branch has already been confirmed.
The condition has already been shelved.
The condition is not currently shelved.
The shelving time not within an acceptable range.
The requested number of Aggregates does not match the
requested number of NodeIds.
The requested Aggregate is not support by the server.
The aggregate value could not be derived due to invalid data
inputs.
many monitored items in the subscription.
No data found to provide upper or lower bound value.
The server cannot retrieve a bound for the variable.
The request specifies fields which are not valid for the
EventType or cannot be saved by the historian.
The aggregate configuration is not valid for specified node.
Message from remote server: The certificate chain is incom-
plete.
Internal, permanent error.
Operating Instructions, 01/2017, C79000-G8976-C427-02
CP 443-1 OPC UA