Siemens SIMATIC S7-400 Operating Instructions Manual page 117

Done Error ErrorID (hex) Name
0 1 A0000002
0 1 A0000003
0 1 A0000004
0 1 A0000005
0 1 A0000006
0 1 A0000007
0 1 A0000008
0 1 A0000009
0 1 A000000A
0 1 A000000B
0 1 A000000C
0 1 A000000D
0 1 A000000E
0 1 A000000F
0 1 A0000010
0 1 A0000011
0 1 A0000012
0 1 A0000013
0 1 A0000014
CP 443-1 OPC UA
Operating Instructions, 01/2017, C79000-G8976-C427-02
PLCopenUA_Bad_FW_
TempError
PLCopenUA_Bad_
ConnectionError
PLCopenUA_Bad_
HostNotFound
PLCopenUA_Bad_
AlreadyConnected
PLCopenUA_Bad_
SecurityFailed
PLCopenUA_Bad_
Suspended
PLCopenUA_Bad_
ConnectionInvalidHdl
PLCopenUA_Bad_
NSNotFound
PLCopenUA_Bad_
ResultTooLong
PLCopenUA_Bad_
InvalidType
PLCopenUA_Bad_
NodeInvalidHdl
PLCopenUA_Bad_
MethodInvalidHdl
PLCopenUA_Bad_
ReadFailed
PLCopenUA_Bad_
WriteFailed
PLCopenUA_Bad_
CallFailed
PLCopenUA_Bad_
InParamFailed
PLCopenUA_Bad_
OutParamFailed
PLCopenUA_Bad_
SubscriptionInvalidHdl
PLCopenUA_Bad_
MonitoredItemInvalidHdl
Programming the OPC UA client blocks
Meaning
Temp. Error; FB could retry to reach FW.
Connection could not be established.
The requested hostname could not be found.
Connection was already established.
Connection failed due to security setup.
Connection is suspended.
Provided ConnectionHdl is not known.
A namespace with the requested name cannot be found on
server.
Target PLC variable is too short for retrieved data.
Invalid or unsupported Type.
Provided NodeHdl is not known.
Provided MethodHdl is not known.
Read failed for unknown reason.
Write failed for unknown reason.
Method Call failed for unknown reason.
Method Call Input parameter conversion failed.
Method Call Output parameter conversion failed.
ATTENTION: this means the MethodCall was executed suc-
cessfully but the returned values could not be converted.
Provided SubscriptionHdl is not known.
Provided MonitoredItemHdl is not known.
5.10 Error numbers
117