Siemens SINAMICS S120 Configuration Manual page 57

Wizards are used to navigate users when drives are being commissioning for the first time;
these Wizards make all of the basic settings in the drive. This enables a drive to be up and
running after only setting a small number of parameters within the drive configuration
process.
The individual settings required are made using graphics-based parameter assignment
screen forms, which also display the mode of operation.
Examples of individual settings that can be made include:
• Terminals
• bus interface
• Setpoint channel (e.g. fixed setpoints)
• Closed-loop speed control (e.g. ramp-function generator, limits)
• BICO interconnections
• Diagnostics.
Experts can gain rapid access to the individual parameters using the Expert List - this means
that they do not have to navigate dialogs.
In addition, the following functions are available for optimization purposes:
• self-optimization
• Trace (depending on drive)
Diagnostics functions provide information about:
• Control/status words
• parameter status
• Operating conditions
• Communication states
Features
• Easy-to-use: Only a small number of settings need to be made for successful first
• Solution-based user navigation simplifies commissioning
• Self-optimization functions reduce manual optimization work
• The built-in trace function provides optimum support during commissioning, optimization
Synchronous Motors 1FK7
Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1
commissioning: Axis rotates
and troubleshooting.
Configuration
5.1 Engineering software
57