Change Start - LG LAN-9600R Owner's Manual

Change Start

Change Start is the function to change the start point
site simulating where to drive using the navigation before
actually driving.
1. Touch the "Change Start Point" button.
The pop -up screen appears.
2. Touch the "OK" button to where you want to change the
start point.
3. The map screen appears on the screen.
4. Touch anywhere on the map.
You can change the direction of the starting point by
pressing the arrow button around the map.
5. Touch the "OK" button.
If you want to return to the current start point where it
receives the GPS signal.
1. Touch the "Change Start Point" button.
The pop -up screen appears.
2. Touch the "GPS" button.
Notes
• If you set a start point and a destination, the navigation
displays a map that shows you the route. In this operation,
the satellite-based global positioning system (GPS) is not
used. Your current position is not detected and
navigation does not keep track of your driving progress.
Use the Change start Mode for trip planning.
• If you set a start point outside memory point, the simulation
will be limited.
Navigation settings
75