Table of Contents
Advertisement
First read and observe the safety warnings
on page 12.
Selecting stations
Selecting stations using arrow
buttons
/
<
>
Selecting stations from a station
list
Updating the station list
Tuning to a station frequency manually
Displaying the frequency dial
Adjusting the frequency in
stages
Quickly browsing through the
frequency band
Hiding the frequency band
Storing stations
Storing the current station to a
station button
Storing a station from the station
list to a station button
Deleting stored stations
on page 3 and the introductory information
⇒
Touch the
or
F ig. 10
<
>
The unit only switches to stored or receivable stations, depending on
what settings have been made for the arrow buttons. Setting for the ar-
row buttons in the
FM/AM setup
⇒
Touch the
F ig. 10
function button to open the station list.
Search through the list and touch the required station to select it.
To close the station list, touch the
In the FM frequency band the station list is updated automatically.
In the AM frequency band, touch the
date the station list.
Turn the setting knob one stop further.
⇒
OR: touch the
F ig. 10
Turn the setting knob.
OR: touch the arrow buttons to the left or the right of the frequency
band.
Touch one of the arrow buttons at the top of the screen ⇒
next receivable station is set automatically.
OR: press and hold one of the arrow buttons at the top of the screen
⇒
F ig.
10. When you release the button, the unit automatically tunes to
the next available station.
OR: place your finger on the slider in the frequency dial and drag it
along the dial.
Briefly press the setting knob.
Manual frequency selection is also closed if you select a station with a
station button. The frequency band closes automatically after a period
of inactivity.
Press and hold the desired station button ⇒
ded.
The station currently playing is then stored on that station button.
⇒
Touch the
F ig. 10
function button to open the station list.
Stations already stored on a station button are marked in the station list
⇒
with the
F ig. 11
symbol.
Select the desired station by pressing and holding on the screen.
Touch the button to which you wish this station to be assigned.
A signal tone sounds, and the station is then stored on this station but-
ton. Repeat the process to store further stations from the station list.
All stored stations can be deleted individually or together in the
menu ⇒ p age 18.
setup
function button.
menu ⇒ p age 18.
⇒
F ig. 11
function button.
⇒
F ig. 11
function button to up-
function button.
F ig. 10
until a tone is soun-
Audio mode
F ig.
10. The
FM/AM
15
Advertisement
Table of Contents
