Table of Contents
Advertisement
®
Some Bluetooth
mobile telephones are detected
and connected automatically when the ignition is
switched on, if a connection already exists. For this
to happen, the mobile telephone itself and the
®
Bluetooth
function in the telephone must be
switched on and all active Bluetooth
to other units must be disconnected.
®
The Bluetooth
connection is free of charge.
®
Bluetooth
is a registered trademark of Blue-
®
tooth
SIG, Inc.
®
Bluetooth
profiles
When a mobile telephone is connected to the tele-
phone control system, data is exchanged via one
®
of the Bluetooth
profiles.
Basic telephony Bluetooth
(HFP):
● If a mobile telephone is connected via HFP to
the telephone control system, you can make calls
wirelessly via the hands-free system. The vehicle's
exterior aerial cannot be used with this. Observe
the notes on using a mobile telephone in the vehi-
cle without a connection to the external aerial
⇒ B ooklet Owner's manual.
Pairing and connecting mobile telephone on the infotainment system
First read and observe the introductory
information and safety warnings
page 30.
In order to operate a mobile telephone via the info-
tainment system, a single pairing process is re-
quired for both devices.
Pairing should only be performed when the vehicle
is stationary.
Conditions
● Ignition is switched on.
● If necessary, disconnect any headsets from the
mobile telephone.
®
● The Bluetooth
function must be activated or
set to visible on the mobile telephone and on the
infotainment system.
● The keypad lock on the mobile telephone has
to be unlocked.
Follow the operating manual for the mobile tele-
phone.
®
The Bluetooth
function is set to visible on the
infotainment system for about 3 minutes after the
ignition is switched on.
32
Composition Touch, Composition Colour
®
connections
®
Hands-Free Profile
on
®
Music playback Bluetooth
tribution Profile (A2DP):
®
● Bluetooth
profile for the transmission of ster-
eo-quality audio signals.
Playback controls Bluetooth
mote Control Profile (AVRCP):
®
● Bluetooth
profile for displaying track informa-
tion and control of playback in the mobile device.
Entries have to be made on the mobile telephone
keypad during the pairing process. The mobile tel-
ephone has to be at hand for this.
Starting mobile telephone pairing
● Press the
infotainment button.
PHONE
● Touch the
Find telephone
OR:
● Press the
infotainment button.
PHONE
● Touch the
function button.
Setup
● Touch the
Select telephone
then
.
Find telephone
Once the search process is complete, the names
®
of all Bluetooth
devices found will be displayed on
the screen.
● Select the mobile telephone to be paired from
®
this list of Bluetooth
devices and then select
Hands-free telephone (HFP)
The infotainment system and the mobile telephone
are now connected. Further input may be required
on the mobile telephone and on the infotainment
system to conclude the connection process.
Advanced Audio Dis-
®
Audio Video Re-
function button.
function button and
.
Advertisement
Table of Contents
