Figure 19. Removing the screw on the side
CAUTION:
Slide the system cover without undue force so that the cables connected to the Skype board and
the system board will not be broken.
Figure 20. Sliding the system cover out
4. Disconnect all the cables from the Skype board and the system board except the Wi-Fi antenna cables.
5. Remove the video capture card. For details, see "Replacing the video capture card" on page 23.
6. Remove the Skype board. For details, see "Replacing the Skype board" on page 24.
7. Remove the Wi-Fi antenna cables. For details, see "Replacing the Skype board" on page 24.
8. Remove the system cover completely from the chassis.
22
Hub 500 User Guide and Hardware Maintenance Manual