Figure 80. Installing the upper cover and the LED board
3. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 56.
Replacing the internal speakers
Attention: Do not open your meeting console or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the system cover. For details, see "Removing the system cover" on page 20.
2. Remove the hinge pipe. For details, see "Replacing the hinge pipe" on page 48.
3. Record the cable routing and cable connection, and then disconnect the internal speakers cable from
the Skype board.
4. Replace the internal speakers.
Figure 81. Removing the internal speakers
52
Hub 500 User Guide and Hardware Maintenance Manual