Using The Got Mobile Function 9 - Mitsubishi Electric GOT2000 Series Quick Start Manual

3. Set the authentication setting
Set the [Operator] and [Password] required when accessing the GOT from an information device, such as a
tablet.
1
4. Set the device allocation setting
Assign GOT Mobile devices (VGD, VGB) that are used with mobile screens to GOT internal devices.
The GOT Mobile devices (VGB and VGD) are virtual devices usable for clients.
Multiple clients can be controlled individually since different GOT internal devices are assigned for each
client.
1
■Relation of GOT Mobile devices and GOT internal devices (for word device)
GOT Mobile device (VGD)
VGD0
VGD1
VGD2
VGD3
•
•
•
VGD999
Using the GOT Mobile Function
2
3
4
2
Client 1
GD10000
GD10001
GD10002
GD10003
•
•
•
GD10999
Setting the GOT Mobile function
Click [Authentication Setting].
1
Confirm that [GOT Mobile exclusive] is selected.
2
Select [Use an administrative operator].
3
Input any characters for [Operator] and [Password]. In
4
this example, input the following name and password.
[Operator] : Admin
[Password] : 1234
Administrative operator and guest operator
Operation rights must be acquired before
operating a mobile screen for which [Target
for exclusive control of operational authority]
is valid. An administrative operator can
acquire the operation rights, but a guest
operator cannot.
Click [Device Allocation Setting].
1
Set the [Device (VGD, VGB) Allocation].
2
Setting the [Word Device (GD)]
Points: 1000
First Device: GD10000
Setting the [Bit Device (GB)]
Points: 1024
First Device: GB10000
With this setting, the following relation is established
between the devices (VGD, VGB) used with mobile
screens and the GOT internal devices.
Client 2
GD11000
GD11001
GD11002
GD11003
•
•
•
GD11999
Setting the GOT Mobile function
1
2
3
4
11