Mitsubishi Electric GOT2000 Series Quick Start Manual page 19

2. Communication setting
Set the personal computer and GOT for communication. Turn on the GOT power before starting the
settings.
Click [Communication] → [Write to GOT].
[Test] button
Click the [Test] button, and confirm that the personal computer and GOT communicate correctly.
3. Transferring project data
Transfer the project data from the personal computer to the GOT.
1
2
3
5
Using the GOT Mobile Function
Confirm that the settings are as shown below.
1
Connection to GOT : Direct
PC side I/F
Click the [OK] button.
2
Confirm that the settings are as shown below.
3
Write data
Destination Drive
Click the [GOT Write] button.
4
4
A dialog will appear when the writing is
5
completed.
Click the [OK] button.
Transferring project data
: USB
: Package Data
: C: Built-in Flash
Memory
Transferring project data
1
2
3
4
5
6
7
8
19