Reset (Serial Port); Clear-Serial-Port-Stats - Siemens RX1400 Reference Manual

Chapter 6
RUGGEDCOM ROX II Actions
</cellmodem>
</interfaces>
</data>
</action>
</rpc>]]>]]>
• {module}
The module number for the cellular modem.
• {port}
The port number for the cellular modem.
• {atCommand}
The AT command to send to the modem. The command must begin with the prefix AT.
Section 6.2.5

reset (Serial Port)

This action resets the specified serial port. Specify the serial module and port in the <module> and <port>
elements. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<interfaces xmlns="http://ruggedcom.com/ns/rmf_ifs">
<serial>
<module>{module}</module>
<port>{port}</port>
<reset/>
</serial>
</interfaces>
</data>
</action>
</rpc>]]>]]>
• {module}
The module number for the serial port.
• {port}
The port number for the serial port.
Section 6.2.6

clear-serial-port-stats

This action clears the port statistics for the specified serial port. Specify the serial module and port in the
<module> and <port> elements. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<interfaces xmlns="http://ruggedcom.com/ns/rmf_ifs">
<serial>
<module>{module}</module>
<port>{port}</port>
<clear-serial-port-stats/>
64
RUGGEDCOM NETCONF
Reference Guide
reset (Serial Port)