Restart-Serserver; Reset-Port (Switch Port) - Siemens RX1400 Reference Manual

RUGGEDCOM NETCONF
Reference Guide
</serial>
</interfaces>
</data>
</action>
</rpc>]]>]]>
• {module}
The module number for the serial port.
• {port}
The port number for the serial port.
Section 6.2.7

restart-serserver

This action restarts the serial server. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<interfaces xmlns="http://ruggedcom.com/ns/rmf_ifs">
<serial>
<restart-serserver/>
</serial>
</interfaces>
</data>
</action>
</rpc>]]>]]>
Section 6.2.8

reset-port (Switch Port)

This action resets the specified switch port. Specify the switch module and port in the <module> and <port>
elements. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<interfaces xmlns="http://ruggedcom.com/ns/rmf_ifs">
<switch>
<module>{module}</module>
<port>{port}</port>
<reset-port/>
</switch>
</interfaces>
</data>
</action>
</rpc>]]>]]>
• {module}
The module number for the switch port.
• {port}
The port number for the switch port.
restart-serserver
Chapter 6
RUGGEDCOM ROX II Actions
65