Installing A Radiator Bracket For Liquid Cooling - HP Omen X Hardware Reference Manual

Installing a radiator bracket for liquid cooling

The radiator bracket can accommodate only 240 mm radiators.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove any fans mounted to the side of the case.
4. If you want to add additional liquid cooling, install the radiator bracket in one of the positions shown in
the following image.
NOTE:
On models that support two brackets, you can install the brackets in either positions 1 and 3 or
positions 2 and 3.
Installation location (3) is present in select models only.
5. Insert the bracket onto the inside rear of the case.
(Removing and replacing the access panel on page
On models that support only one bracket, you can install the bracket in either position 1 or 2.
(Preparing for disassembly on page
Installing a radiator bracket for liquid cooling
8).
18).
31