What Is Sl2100 Inmail; Parts Available For Sl2100 - NEC SL2100 Quick Install Manual

SL2100 InMail
1 – What is SL2100 InMail?
InMail is a built in voice mail system which provides mailbox functionality for users and groups on the system.
InMail can also be used for Automated Attendant operation, answering incoming trunk callers and routing them
to the chosen destination within the SL2100 system.
InMail voicemail provides;

4 Answer/Recording channels (can be expanded to 16)

2/15/120 Hours of Recording Storage options

26 Voice Prompt Languages (available with SD card)

128 User Mailboxes

32 Group Mailboxes

32 Routing Mailboxes

E-Mail notification (license required)

Conversation recording

Interactive soft-key integration and on-screen message notification

Greetings and Messages upload/download via webpage
An option also exists to supplement voice mail storage by installing an additional SD card into the socket on the
CPU. Supported SD cards are supplied by NEC only.

SDVMS-C1 SD Card 15 Hours

SDVML-C1 SD Card 120 Hours
The quantity of answer/recording channels can be increased from 4 to 16 by adding the IP7WW-EXIFB-C1
daughter card to the CPU.
This guide explains the setup required for the most common InMail functions and it is assumed you have a
knowledge of the SL2100 system and configuration using PCPro.

Parts available for SL2100

IP7WW-4KSU-C1
IP7EU-CPU-C1
IP7EU-CPU-C1-A
IP7WW-SDVMS-C1
IP7WW-SDVML-C1
SL2100 VM E-MAIL
NOTIFY LIC
IP7WW-EXIFB-C1
IP7WW-3COIDB-C1
IP7WW-2BRIDB-C1
IP7WW-1PRIDB-C1
IP7WW-000U-C1
IP7WW-082U-B1
IP7WW-308U-A1
IP7WW-008U-C1
IP4WW-Battery Box
161893001-A
Quick Install Guide – SL2100 InMail Voicemail rev 1.2
SL2100 Chassis unit
SL2100 CPU card
SL2100 CPU card with pre-installed
IP licenses and 2hour InMail
SDVMS-C1 SD Card 15 Hours
SDVML-C1 SD Card 120 Hours
Email notification – System wide
license
Expansion interface card
Analogue trunk daughter card
2BRI card
ISDN PRI card
Trunk carrier card
8 Digital Extension (2wire) and 2
SLT extension card
8 Hybrid Extension (4wire)
extension card
8 Analogue extension card
Battery box
Rack mount shelf
Included within this guide
Interface card required to connect to the
expansion chassis, also increases InMail
channels to 16
3 analogue trunks, max. 4 per unit
2 x BRI circuits, 4 trunks
1 PRI circuit, up to 30 trunks
Require when 082E or 008E card is not
available to install the 2BRIDB,1PRIDB or
3COIDB card
8 digital and 2 SLT extension interfaces, max
3 per unit
8 hybrid extension interfaces, max 4 per unit
8 analogue extension interfaces, max 4 per
unit
External battery box for power fail backup
(batteries not included)
Rack mount for SL2100 chassis unit
4