Configuring A Wpa Or Wpa2 Peap-Mschapv2 Connection - Philips TC20 Installation Instructions And Use

To specify multiple networks to which the cardiograph can connect, repeat step 5 on
5
page 11 and the steps in this procedure as often as needed to configure the necessary set of
networks.
Configuration is complete. Proceed to "Step 4. Restarting the Cardiograph" on page 18.

Configuring a WPA or WPA2 PEAP-MSCHAPv2 Connection

This option uses a single certificate on the cardiograph for authentication.
To configure a WPA or WPA2 PEAP-MSCHAP connection
After selecting the SSID as described on page 10, select the following options in the Wireless
Network Properties dialog box:
Touch the
1 Encryption
Touch the
2 Authentication
In the
3 802.1X Authentication
Touch .
4 Properties
Provide the certificate user name, password, and domain.
5
dropdown arrow, and select the desired method:
dropdown arrow and select
section, touch the
PageWriter TC20 Wireless LAN Installation Instructions
Step 3. Configuring Network Connection Settings
AES
or .
WPA WPA2
dropdown arrow and select
EAP type
or .
TKIP
.
PEAP
13