Configuring Wireless Adapter Settings; Before You Begin - Philips TC20 Installation Instructions And Use

Configuring Wireless Adapter Settings

Configuring Wireless Adapter Settings
Configuring your wireless connection comprises the following steps:
Configuration Step
Install the wireless adapter
1
If your cardiograph already has the adapter
installed, proceed to step
Load an authentication certificate or network key.
2
If not required, proceed to step
Configure the network connection using the NetUI
3
configuration utility.
Restart the cardiograph.
4
Each of these steps is described in this guide, in detail.

Before You Begin

Before you start the configuration process, ensure you have the following available:
This document.

AmbiComUSB wireless adapter. See "Step 1. Inserting the Wireless USB Adapter" on

page 5.
Authentication certificate and keys, if needed, loaded onto a USB memory stick.

Certificate requirements for each encryption method are described in Table 1, "Popular
EAP types and required credentials," on page 2. Contact your network administrator for
any certificate files.
The PageWriter TC Cardiograph Wireless LAN Upgrade Kit includes the AmbiCom adapter
and information about the adapter.
4 PageWriter TC20 Wireless LAN Installation Instructions
.
2
.
3
See ...
"Step 1. Inserting the Wireless
USB Adapter" on page 5
"Step 2. Loading Authentication
Certificates and Keys" on page 6
"Step 3. Configuring Network
Connection Settings" on page 10
"Step 4. Restarting the
Cardiograph" on page 18