Set Lengths For Codabar - Philips SpeechMike Configuration Manual

Advanced Scanner Configuration Guide 41

Set Lengths for Codabar

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Lengths for Codabar may be set for any length, one or two discrete lengths, or lengths within a
specific range.
One Discrete Length - Select this option to decode only those codes containing a selected length. For example,
select Codabar One Discrete Length, then scan 1, 4, to decode only Codabar symbols containing 14 characters.
Numeric bar codes begin on page 51. To change the selection or cancel an incorrect entry, scan the Cancel bar
code on page 51.
Codabar - One Discrete Length
Two Discrete Lengths - This option sets the unit to decode only those codes containing two selected lengths. For
example, select Codabar Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only Codabar symbols containing
6 or 14 characters. Numeric bar codes begin on page 51. To change the selection or cancel an incorrect entry,
scan the Cancel bar code on page 51.
Codabar - Two Discrete Lengths
Length Within Range - Select this option to decode a code within a specified range. For example, to decode
Codabar symbols containing between 4 and 12 characters, first scan Codabar Length Within Range, then scan 0,
4, 1 and 2 (single digit numbers must always be preceded by a leading zero). Numeric bar codes begin on page 51.
To change the selection or cancel an incorrect entry, scan the Cancel bar code on page 51.
Codabar - Length Within Range
Any Length - Scan this option to decode Codabar symbols containing any number of characters.
Codabar - Any Length
Revision: 2.0 , technical changes excepted