JVC KD-AV7005 Service Manual page 14

3.2.2 Removing the drive gears and forth gear
(See Figs.2 to 4)
• Remove the display drive unit.
(1) From the both sides of the display drive unit, remove the
four screws B attaching the guide rails (L)/(R). (See Figs.2
and 3.)
(2) From the top side of the display drive unit, pull the drive
gears out of a drive gear shaft in the direction of the arrow
while holding the drive gear shaft. (See Fig.4.)
Reference:
Remove the drive gear shaft as required. (See Fig.4.)
(3) From the left side of the display drive unit, remove the
E.ring fixing the forth gear. (See Fig.4.)
(4) Remove the forth gear toward this side. (See Fig.4.)
1-14 (No.MA101)
Display drive unit
Fig.2
Guide rail (R)
B
Fig.3
E.ring
Forth gear
Drive gear Drive gear shaft
Fig.4
Guide rail (L)
B
Display drive unit
Display drive unit
Drive gear